2018-07-01, 08:12 PM | #1 |
دكتور رابد
تاريخ التسجيل: Jun 2016
المشاركات: 15,175
معدل تقييم المستوى: 24 |
Zuken E³.series 2017 version.18.33 Update
Zuken E³.series 2017 version 18.33 Update | 291.8 mb Designer-30982 Cable device designations are missing after ELCAD import Designer-31056 Cutouts in 3D representation of E3.panel might be displayed beyond the original model Designer-31105 When adjusting the segment length the following error may occur (with loops and options) 'Impossible to adjust segment length, because segment is connected.' => more clear error message Designer-31215 Chinese characters with specific fonts are not displayed at PDF Export Designer-31542 Incorrect return and output values in Messages window with COM method "Job.ExportImageItems" Designer-31641 Regarding the space requirement, model views are not considered correctly when editing the model in Database Editor Designer-31645 Net segments can't be connected under certain circumstances Designer-31715 Incorrect import of specific DGN file Designer-31737 After writing and reading a subcircuit, symbol texts (#13 Text variable) are missing; Sheet names not visible (RuplanImport) Designer-31743 Sheet texts are missing after RuplanImport Designer-31774 Mounting rail in E3.panel is incorrectly displayed after refresh in project Designer-31807 No display of signal logic lines between connector views of block connectors (hierarchical connectors also) when an additional mating connector is connected to the block connector Designer-31845 The following warning appears at update of an attribute text template symbol which is located on a connection line passing a block 'W - Symbol type for following symbols not changed... ...Symbol {2} (symbol was previously not assigned to a block, now it would be assigned (because of space requirement rectangle)) W - Not all changes of symbol type were completed successfully!!' Designer-31898 Device table shows attributes of the component, when 'Device' and 'Component' are defined as owners for the attribute Designer-32041 When a numeric prefix and postfix (suffix) is used for wire numbering, the placeholder for the number of digits is incorrectly incremented Designer-32048 DBE: Component table - line may be locked after copying and pasting Designer-32064 In specific circumstances, it might happen that the variant type cannot be changed Designer-32076 E3.panel - certain circumstances may cause incorrect wire lenghts and cable ducts are not recognized Designer-32091 "Save current configuration without variants / options" contains inactive connect lines Designer-32100 PDF export might interrupt with error ''E - Following error has occurred while exporting to PDF: A link annotation refers to non-existing page '4'' Designer-32102 The E3.viewer converts Multiuser-projects => Project can't be opened with Viewer if it has to be converted Designer-32122 The COM method "Job.HighlightAttribute" doesn't work with internal attribute name Designer-32139 E3 may crash upon exporting to .e3p, when connectors exist that own mating connectors with unassigned pins Designer-32146 E3 may crash under certain circumstances when exporting to a subcircuit Designer-32150 The COM call "Job.JumpToId" resets all previously set highlights at item ID of ItemType 110 (group) although the setting "Keep existing highlights when jumping" is active Designer-32151 Message 'E - Error in function get_active_connpart(), ret = 1' at update of symbols with component assignment and checked setting 'Use physical data of cavity part models instead of device model' Designer-32155 Incorrect docking of cable duct in E3.panel after modification Designer-32175 The COM function 'Sht.GetSymbolIds' returns inactive symbols although the corresponding option is not active Designer-32181 Inserting a shield to a cable "...as overbraid" leads to error: "E - Error in Function int __cdecl get_child_devices(int,int,bool), ret = 2" About Zuken E³.series 2017. Zuken's E3.series is a Windows-based, scalable, easy-to-learn system for the design of wiring and control systems, hydraulics and pneumatics. Its object-oriented architecture provides an integrated and consistent design approach to help eliminate errors, improve quality and reduce design time. The latest release contains new and enhanced functionality that further increases productivity throughout all phases of engineering, from design to manufacture. New third party integrations extend the E3.series ecosystem of solutions. Enhancements in E3.series 2017 cover all main E3.series modules: E3.schematic, E3.cable, E3.panel, E3.formboard and E3.PLC Bridge. About Zuken. Zuken works globally with leading companies to optimize their electrical and electronic engineering design and related manufacturing processes through the provision of leading edge software and consulting services. Our unique combination of proven experience, technological expertise and agility creates best in class solutions. Our transparent working practices and belief in integrity in all aspects of business produces long lasting and successful customer partnerships. Product: Zuken E³.series Version: 2017 version 18.33 Update Only Supported Architectures: 32bit / 64bit Website Home Page : كود:
http://www.zuken.com System Requirements: PC Supported Operating Systems: Windows 7even and newer Software Prerequisites: Zuken E³.series 2017 or above Size: 291.8 mb Download link: كود:
Links are Interchangeable - No Password - Single Extraction
|
أدوات الموضوع | |
|
|
المواضيع المتشابهه | ||||
الموضوع | كاتب الموضوع | المنتدى | مشاركات | آخر مشاركة |
Zuken E³.series 2017 version.18.32 Update | mitsumi | مواضيع عامة | 0 | 2018-06-27 04:00 PM |
Zuken E3.series 2016 version 17.00 180113 | rollroy12 | مواضيع عامة | 0 | 2018-01-13 12:27 PM |
Zuken E3.series 2016 version 17.00 171205 | rollroy12 | مواضيع عامة | 0 | 2017-12-05 11:54 AM |
Zuken E3.series 2016 version 17.00 170401 | rollroy12 | مواضيع عامة | 0 | 2017-04-01 09:24 AM |
Zuken E3.series 2016 version 17.00 170329 | rollroy12 | مواضيع عامة | 0 | 2017-03-29 10:35 PM |