|
مواضيع عامة يشمل جميع المواضيع العامة |
|
أدوات الموضوع |
2017-08-25, 10:45 PM | #1 |
دكتور رابد
تاريخ التسجيل: Aug 2016
المشاركات: 7,068
معدل تقييم المستوى: 16 |
Mastercam 2018 Update 1 only (v20.0.17184.10) for SolidWorks.2010-2017 (x64)
Mastercam 2018 Update 1 only (v20.0.17184.10) for SolidWorks 2010-2017 (x64) | 44 Mb Chip Break is now available for Face and Finish Toolpaths when chip breaks occur. Mill-Turn machine definitions now contain tailstock and quill components. The new Tailstock Operation allows you to define how the machine's tailstock is used. Angle Sweep improves the creation of more complex wireframe functions and when creating or editing primitives, there are now on-screen sweep and rotate controls which can snap to the AutoCursor positions of existing entities. To make Roll and Unroll results easier to predict, Seam Control lets you visually rotate a seam to see how geometry will respond, as well as snap to AutoCursor positions. Hole Axis makes it easier to work with a large number of holes. NOTE: You must have this release كود:
https://avxhm.se/software/Mastercam-2018-version-20-0-14713-10-for-SolidWorks-2010-2017.html Home Page - كود:
http://www.mastercam.com/en-us/ Download link: كود:
Links are Interchangeable - No Password - Single Extraction
|
|
|
المواضيع المتشابهه | ||||
الموضوع | كاتب الموضوع | المنتدى | مشاركات | آخر مشاركة |
Mastercam.2018 Update 1 only (v20.0.17184.0) (x64) | missyou | مواضيع عامة | 0 | 2017-08-25 10:39 PM |
DATAKIT 2017.3 Import-Export Plugins for SolidWorks.2010-2018 | mitsumi | مواضيع عامة | 0 | 2017-07-27 07:44 PM |
Download> Mastercam 2018 version 20.0.14713.10 for SolidWorks.2010-2017 170609 | rollroy12 | مواضيع عامة | 0 | 2017-06-09 05:45 PM |
Mastercam 2018 Version v20.0.14713.10 For Solidworks 2010-2017 (x64) | bestsoft84 | مواضيع عامة | 0 | 2017-06-07 05:13 PM |
Mastercam 2018 version 20.0.14713.10 for SolidWorks.2010-2017 | mitsumi | مواضيع عامة | 0 | 2017-06-02 04:55 PM |